Super Quality PET Granules Production Line , PET Flakes Recycled
Plastic Granulator Machine
QUICK DEATIL :
1. With different designs of screw,this machine can be applied to
granulate the recycled material of rigind HDPE,PET.PC and other
material.It can be stopless in the course of production.It uses
pneumatic conversion and strong wind blowing,with water
cooling,dewatering machine.At the same time can adjust stainless
steel storage container and can run at high speed for along time
while extrude stably.
2. PET Recycling machine, plastic recycle machine , plastic
recycling euipment. It has such advantages: ---High-efficient force-feeder ensures high capacity feeding, low
---Single screw extruder, equipped with specially designed screw
& barrel, venting system, has a very good output capacity.
---Pelletizing style: water-ring cutting with extrusion mould, even
cutting ensures good shape.
---Auxiliary machine: pellets cooling & classifying.
1. waste PET bottle scrap granulating production line is working
for recycling pet bottle material , after pet bottle washing and
crushing , the pet material is processed into small size and clean
2. The screw is made of high tool steel 38 CrMoALA or W6Mo5Cr4V2 by
special heat-treatment, which is possessed with high
corrosion-resistat and high functions. Euro-style rectangle barrl,
reflux refrigeration channel is optimized and disposed, which makes
temperature difference in D areas smaller. Innovated design of
heater tightened style insures high efficiency of heat transfer and
high longevity of heater. The material is used high quality
nitrided steel, corrosion proof or antifriction with correspounding
3. PET granule production line is specially designed for PET bottle
flakes, PET fiber, with good performance and high output, and are
easy to operate and maintain.
Application Raw Materials: PET
Material shapes: Bottle flakes, scrap
Melting the plastic particles from the agglomerator and removing
the air and moisture out of the material.
The newly style powerful gearbox is designed parallel tri-axial
structure, the main machine gearbox deceleration and the torque
synthesizes a body, with decelerating, torque assignment. The
structure is compact. The torque transmission is steady. The gear
and shaft material is 20CrNi2MoA. The two main output shafts is
adopted imported bearing. Reduction ratio: 3.75:1. The input shaft
speed: Max: 1500 RPM. The output shaft speed: Max: 400 RPM. It is
adopted oil permeating lubricant for gear body and bearing, also is
advantageous in the temperature decreasing and cooling. The oil
pump power: 0.37 KW.
Effective capacity (L)
Mixer speed (rpm)
Motor power (KW)
1) We give you suitable suggestions according to your actual need.
2) Technical support: available lifelong
3) Under the right operation way, the screw and barrel is for 10000
4) Our expert will answer any inquiry within 48 hours and it will
be solved as soon as possible.
5) The customer can send the engineer to our company with training
6) Our engineer can be to the Buyer's company for installation and
testing the lines.
7) The seller provides you with complete technical support
documents and the relative drawings of the electric components
written in Chinese and English.